Well Stimulation Chemicals

CT CRL 101 CROSS LINKER FOR ACID

It is a zirconate based cross-linker used to produce cross-linked gels with derivative guar carboxymethyl hydroxypropyl-guar (CMHPG) polymers. An external buffer targets optimal Ph windows (4.0-4.5) in which zirconate species, responsible for bonding with CMHPG, are at the highest concentration. Gel viscosity builds-up rapidly (in seconds) with zirconate cross-linker creating a robust fracturing fluid with excellent rheological properties.

SDGA-700 SELF DIVERT GELLING AGENT

SDGA-700 is a non-polymeric blend of cationic surfactants used to produce self-diverting acid systems and can be used as a foaming agent. Viscous acid penetrates deeper into the formation before spending. As pH rises, the viscosity breaks; however, there is enough residual viscosity to flow back acid-insoluble fines. Viscosity of 50-60 cps is typical for acid used up to 155 deg F

PROP-LITE CERAMIC PROPPANT

It is a high performance low density ceramic proppant. It has a similar specific gravity   and bulk density of sand, but delivers high conductivity and flow capacity to   enhance production and EUR (estimated ultimate recovery.

CT-BRK-101 GEL BREAKER

It is an Oxidizing breaker of ammonium persulfate in a powder form that is readily soluble in water. With CT BRK 101 fracturing fluid viscosity can be reduced to near the viscosity of water allowing fora better return of the fluid to the surface.

CT BRK 201 - ENCAPSULATED GEL BREAKER

It is an encapsulated oxidizing gel breaker used in hydraulic fracturing applications. CT BRK 201 slowly releases ammonium persulfate into the fracturing fluid. This allows the break of the fracturing fluid to be delayed. Higher breaker concentrations can be added to the fracturing fluid without compromising fluid rheology. Since CT BRK 201 is a solid, breaker will not be lost to the formation during fluid leak-off. 

CT NE-100 NON-EMULSIFIER NON-IONIC

CT NE-100 is a special blend non-ionic surface-active non emulsifier specially formulated

for well stimulation. Normal dosage ranges from 200 - 250 ppm.

CT NE-300 NON-EMULSIFIER CATIONIC

CT NE-300 is a special blend Cationic surfactant with excellent record in use as non-emulsifiers, specially formulated for well stimulation. Emulsions are simply a dispersion of either water droplets in oil or the reverse. Most oil field emulsions are water in oil. 

CT-OSR  OIL SOLUBLE ANTI LEAKING AGENT

CT-OSR is a specially formulated product which is soluble in liquid hydrocarbons and in water-base fluids. It is widely used as a Fluid loss additive in Fracturing & acidizing operations in well stimulation. It is a very active for very high temperatures. It will dissolve in either oil or water. However, as the solubility is much higher in oil than water, a water-base fluid should be used as the carrier. 

CT CI300 ACID CORROSION INHIBITOR 

It is an organic corrosion Inhibitor for HCL, HCL‐HF acids, and HCL‐organic acid blends stable at High temperatures

CT CI200 ACID CORROSION INHIBITOR 

CT CI200 is a cationic acid corrosion inhibitor designed to inhibit the attack of hydrochloric acid on steel pipe during acidizing operations

GA300 ACID GELLING AGENT 

It is a preparation of Poly acrylamide and hydro treated distillates. It is a high molecular weight polymer viscosifier

ABF AMMONIUM BI FLOURIDE 

ABF AMMONIUM BI FLOURIDE is added to inhibited hydrochloric acid to form mud-acid 

ASC106 ANTI SLUDGE AGENT 

It prevents asphalt sludge and emulsions when treating with HCL acid it promotes rapid return of the treating fluid to the wellbore after acidizing

CDEM101 DEMULSIFIER

It is used to Break emulsions that is, to separate the two phases. The type of demulsifier is selected depending on the type of emulsion, either oil‐in‐water or Water‐in‐oil

CDA100 ACID DIVERTING AGENT 

It is a temporary plugging agent which is soluble in liquid hydrocarbons and in water-base fluids

CIC106 IRON CONTROL AGENT 

It is a blend of sequesters, iron preventing Gelatinous ferric hydroxide precipitation

MFA301 MULTI FUNCTION AGENT 

It is a blend of concentrated nonionic surfactants to remove or control down-hole emulsion formation when stimulation fluids come into contact with hydrocarbons present in the formation during well  stimulation operations

MSOL-A MUTUAL SOLVENT 

MSOL-A MUTUAL SOLVENT is used for matrix-acidizing operations in sandstone formations

CSA103 SUSPENDING AGENT 

It is a blend of surfactant used primarily to increase the ability of acid to suspend fine, insoluble particles which are released during acidizing operation

CA CIDE 101 BIOCIDE AMINE TYPE 

CA CIDE 101 BIOCIDE AMINE TYPE is a quaternary amine based bactericide

CACIDE 201 BIOCIDE 

It is a highly effective potent blend of Gluteraldehyde bases which are effective in the on shore / off shore application

MOS-ABS OXYGEN SCAVENGER

It is an Ammonium Bi-sulphite (Oxygen Scavenger) solution which is used for removal of dissolved oxygen to prevent internal oxygen corrosion in brackish water handling  equipment at crude oil desalting system

SD-SURF SELF DIVERT SURFACTANT 

It is a blend of cationic Surfactant Viscosities, HCL acid by forming a macromolecular structure of oriented micelles

SCAV S H2S SCAVENGER 

It is a blend of surfactant, preservative, recommended for the treatment vapors with a high Content of hydrogen sulphide, for removal of sulfide and to enhance control of microorganisms

NSURF NON IONIC SURFACTANT 

It is a non emulsifier that can be applied to aqueous stimulation, fluid including acid, fracturing Fluid, or other stimulation fluid